Home / Video Guide

Video Guide

Factory and Production of WBS Solar Pump
how we make our pumps

WBS is from Ningbo, Zhejiang, the biggest port in China. WBS began producing water pumps in 1998. In 2008, we independently developed and produced solar water pumps.

We have OEM production for more than 200 solar pump dealers around the world. Over the past 10 years, we have produced more than 150,000 sets of solar water pumps that have been exported to other parts of the world. We have continued to iterate on the research and development of solar water pumps, meet international quality standards and have a number of technical patents.

How to Install a WBS solar pump?
Installation of the pump with controller.
Sometimes, you are new about the solar bore pump. The pump installationg will be a little complicated for you. This video will show you how to install the pump with water pipe, wires and controller.

In this video, you will see our workmate using the free installation in the package to install one 3DPC series WBS solar bore pump. After all the steps in the video, you can just connect the solar panels to the controller.
How to put the pump into the bore/well?
This video is an overview of preparing and installing a submersible well pump for a home application. This video is not a how-to video; it is just to show the process of installing a pump for the do-it-yourself crowd.

In this video, you will see the Aqua Science service technicians prepare the pump by attaching the wires, applying the heat shrink splice kits to seal the connection, attaching the pump to the poly pipe, and attaching the torque arrestor. They then lower the pump into the well, securing the wire to the pipe at a set distance. Finally, they attach the pipe to the pitless adapter, creating the connection to the house.
subscription